KDT Edgebanding Machine Guillotine Blades / Cutting Blade For KDT Edge Bander

Product Description

A dull guillotine blade does not need a new cutting unit, it needs the right blade back in the seat. These cutting knives for KDT edgebanders come in three body sizes — 100 x 82 x 7 mm, 106 x 82 x 7 mm and 110 x 20 x 13 mm — and in both positive and reverse cutting directions, so one order covers both trimming stations of the machine. Match the size and the direction of the part you take off, quote product 45314423 with it, and the blade is a straight swap.

A shop running a KDT edgebander hits the same three interruptions. A guillotine blade loses its edge and starts tearing the band instead of shearing it, so the panel goes to the rework pile. The spare on the shelf is the wrong body — 20 mm narrow against 82 mm wide — and the line waits for a courier. Or only one cutting direction is in stock, so the opposite trimming station stays down until the next delivery.

These are the guillotine cutting blades for KDT edgebanding machines: the knives that shear the edgeband to length at the end of the glue line. They are supplied in three sizes — 100 x 82 x 7 mm, 106 x 82 x 7 mm and 110 x 20 x 13 mm — and in both positive and reverse directions, so the left-hand and the right-hand trimming stations are covered from one product line, not two.

Each blade is a replacement part for the KDT edge bander cutting unit, which is why the swap takes minutes and no machine calibration follows it. The two 82 x 7 mm bodies and the 110 x 20 x 13 mm body are different parts, so the buyer reads the size off the worn blade, picks the direction that station cuts in, and orders against that pair of facts instead of a model year.

Product Features

Six facts decide whether a guillotine blade fits, and all six are on this listing.

• Three body sizes. 100 x 82 x 7 mm, 106 x 82 x 7 mm and 110 x 20 x 13 mm; the two wide bodies differ by 6 mm in length only.
• Two directions. Positive and reverse are both listed, so the left and the right trimming stations are ordered in one go.
• KDT-specific. The blade is listed for cutting knives on KDT edgebanders, so there is no cross-brand guesswork on the seat.
• Narrow body separated. The 110 x 20 x 13 mm part is 62 mm shorter in depth and 6 mm thicker than the 82 x 7 mm blades — it does not substitute for them.
• Cutting tool only. No motor, no drive and no control unit; the worn blade comes out of the existing holder and the new one goes in.
• Order by size and direction. Quoting needs three facts: size, direction, quantity — product ID 45314423 pins the rest.
• Thickness splits the family. 7 mm against 13 mm thick is a 6 mm step, and it sits in a different holder, so the thickness on the order matters as much as the length.

Product Parameters

Product Advantages

Right now a dull guillotine edge leaves two options: wait on a courier for one blade, or keep running a worn one and accept a torn band on every panel.

• Three sizes on one order. 100, 106 and 110 mm bodies ship against one purchase order, so a machine change does not become a stock-out.
• Both cut directions covered. Positive and reverse sit on the same line of supply, so a two-station trimmer is never half-serviced.
• No model-year guessing. You measure the blade that came off the machine, match one of three sizes and one of two directions — the wrong-part return disappears.
• A swap, not a rebuild. The blade is a cutting tool fitted into the existing seat, so the fix stops at the knife and does not reach the cutting unit.
• One order covers two stations. Both trimming stations are serviced from a single order line, so the second blade never waits on a second courier.
• One message to a price. Size, direction and quantity are enough; with product 45314423 on the message, nothing has to be matched by photograph.

Frequently Asked Questions

Which sizes do these KDT guillotine blades come in?

Three. 100 x 82 x 7 mm, 106 x 82 x 7 mm and 110 x 20 x 13 mm; the first two share the 82 x 7 mm body and differ only in the 100 mm or 106 mm length.

How do I pick between the 100 mm and the 106 mm blade?

Measure the blade you are taking out. If the length reads 100 mm order size 1, if it reads 106 mm order size 2 — the 82 x 7 mm depth and thickness are identical on both, so length is the only thing that separates them.

What does positive and reverse mean here?

It is the cutting direction, not the size. The blade has to match the direction the station it sits in cuts in, which is why both directions are listed separately and ordered by name.

Can I use the 110 x 20 x 13 mm blade in place of the 82 x 7 mm one?

No. It is a different body — 20 mm deep against 82 mm, and 13 mm thick against 7 mm — so it is a separate part for a separate holder, not a substitute.

Will these fit an edgebander from another brand?

No. They are listed as cutting knives for KDT edgebanders, and the fit is defined against the KDT cutting unit. For another brand, match the blade on your own machine instead of this listing.

Is a motor or a cutting unit included?

No. The listing is the guillotine blade — an edgebander cutting tool. The holder, the drive and the rest of the trimming station stay on the machine.

How fast can a blade be changed?

As fast as the holder comes apart. The blade is a single cutting tool held in the existing seat, so the work is unbolt, swap, re-set the cut — no motor work and no unit removal.

What do I send to get a price?

Size, direction and quantity. Add product ID 45314423 and the quote goes back against the exact listing, with pricing confirmed on request.