Edgebanding Machine Glue Pot KDT Edgebander Parts Woodworking Machinery

Replacing a leaking or scored glue pot on a KDT edgebander? Part 41556015 is the glue pot for KDT edge banding machines: a 16.3 kg assembly with the metal work in stainless steel and the remaining parts in plastic, finished in black and supplied in both left and right versions. Upper and lower scrapers are available on the same order. It is a purely mechanical spare, so the changeover is unbolt, transfer fittings, re-clamp. Send your machine model and fitment is checked against 41556015 before quoting.

An edgebander that runs hot-melt adhesive lives or dies by its glue pot. Three things go wrong: the tank face pits and the glue film stops laying evenly; the pot weeps at the seam and adhesive lands on the panel; and when it fails, the only quote left is a machine-builder price for a wear part.

This is the pot itself: the reservoir that holds and feeds hot-melt adhesive on a KDT edgebander. It is catalogued as woodworking spare parts, with the metal work in stainless steel and the non-metal parts in plastic. Net weight is 16.3 kg - heavy enough to sit flat under vibration, light enough for two people and a trolley.

Fitment decides whether a glue pot is worth buying. The assembly is catalogued for KDT edgebanders and supplied in left and right versions, so a machine with the pot on the opposite side still uses one part number. Upper and lower scrapers are available on the same order when the existing pair is scored.

It is a mechanical spare: no motor, no electronics, no wiring to re-terminate. The swap is unbolt the old pot, transfer the fittings, re-clamp the new one - no service call. Made in Guangdong, China; OEM/ODM builds are acceptable. Price on request.

What part 41556015 is specified as, item by item.

• Stainless steel and plastic build. Metal parts are stainless steel and the rest is plastic, so the adhesive sits against stainless, not a painted mild-steel face.
• 16.3 kg net weight. The 16.3 kg mass holds the pot flat on its mounting face instead of letting it walk once the line vibrates.
• Left and right versions. Both hands are catalogued under one part number, so a hall with pots on either side stays on one purchase line.
• Upper and lower scrapers available. The scraper pair can be ordered with the pot instead of chased down later as a second line item.
• Black finish. One finish across the assembly, black on both metal and plastic, so a replacement matches the machine.
• Catalogued for KDT edgebanders. Listed in the edge banding machine parts category for KDT edge banding machines, not as a universal fit.
• Mechanical only. No motor, no electronics, no wiring, so the changeover is three steps: unbolt, transfer fittings, re-clamp.
• OEM/ODM acceptable. Buyer-specified versions are quoted alongside the standard build, so a private-label order needs no new part number.
• Guangdong origin. Produced in Guangdong, China, the province the edgebander parts trade already ships from.

A failed glue pot usually leaves two routes: an outside service visit, or a machine-builder price. This part is the third.

• You keep the line instead of booking a service visit. A 16.3 kg bolt-on assembly with no wiring is a mechanical swap, so downtime is the lift and the clamp, not a technician's calendar.
• One part number covers both machine hands. Left and right pots sit under the same entry, so a mixed hall does not open two purchase lines for one wear part.
• Scrapers ride with the pot. Adding upper and lower scrapers to the same order removes a second freight event and a second set of export papers.
• Stainless steel where the adhesive sits. Stainless on the metal parts, plastic on the rest: the tank face is not a coated surface fighting hot glue every shift.
• A weight you can plan the lift around. 16.3 kg is documented before the crate is built, so two people and a trolley are enough.
• Buyer-specified builds accepted. OEM/ODM is acceptable, so a private-label version or a modified fitting gets quoted instead of refused.
• Quoted against your machine, not a catalogue guess. Send the machine model and the side the pot sits on; fitment is checked against part 41556015 before packing.

Yes, if your machine runs part 41556015. Send the machine model and a photo of the pot you are replacing, and the fitment is checked against that number before the order is packed.

Yes, both. The pot is catalogued in left and right versions under one part number, so tell us which side the current pot sits on when you enquire.

No. Upper and lower scrapers are available on the same order as the pot, so the pair ships with it instead of arriving on a second freight bill.

16.3 kg net. That is a two-person lift with a trolley, and the weight is written on the packing list rather than estimated at the crate.

Stainless steel on the metal parts, plastic on the non-metal parts, black finish throughout. It is not a coated mild-steel body.

No. This is a mechanical spare with no motor, electronics, or wiring, so the swap is unbolt, transfer the fittings, and re-clamp.

Yes. OEM/ODM is acceptable; send the drawing or the label artwork with the enquiry and the quote covers that build.

Price is quoted per enquiry, because fitment and quantity change it. Send the machine model, the side (left or right), and the quantity you need.