2-024-95-6492 Horizontal Drilling Unit For Homag Weeke CNC Machining Center 2024956492

Need the block, not the head? 2-024-95-6492 / 2024956492 is the single-spindle horizontal drilling block for Homag Weeke CNC machining centers, listed for drilling horizontal holes through a panel edge. One part, 2 number formats: 22-024-95-6492 in 4 groups, 2024956492 in 10 digits. Cross-referenced as Horizontal Boring Block, Homag PTP160 and Drilling Unit Venture 08M, and it bolts to the drilling axis already on the machine. Ships as 1 standard carton box; no list price is published, so the figure is quoted per enquiry against part number and quantity.

Three things go wrong when a Weeke machine stops drilling sideways: the panel line sits idle while the fault is traced, the whole drilling head gets quoted instead of the block that failed, and the replacement that finally arrives carries a number nobody re-checked.

The 2-024-95-6492 horizontal drilling block closes all 3 in one order. It is the unit that drills horizontal holes into a panel edge, bolted to the drilling axis of a Homag Weeke CNC machining center. The datasheet names it 2 ways — 22-024-95-6492 in 4 groups, 2024956492 in 10 digits — and both point to the same single-spindle block.

It is listed for Homag Weeke CNC machining centers and cross-referenced under 3 application strings: Horizontal Boring Block, Homag PTP160 and Drilling Unit Venture 08M. Match 1 of those against the plate on your machine, because the block is sold by part number rather than by drawing.

Category is woodworking machine tools and spare parts, packing is 1 standard carton box, and no price is published: the quote closes on 3 details — part number, quantity and machine model. Order the block and the head, the axis and the machine all stay where they are.

Everything below comes from the datasheet and the 7 photos of the part — 8 points, no estimates:

• 1 spindle per unit — each block carries 1 boring spindle, so a failure stays a 1-part repair instead of a head replacement.
• 2 number formats, 1 part — 22-024-95-6492 in 4 groups and 2024956492 in 10 digits resolve to the same block when the quote and your stock system disagree.
• Horizontal holes, 1 axis — listed use is drilling horizontal holes, the line of holes that runs into a panel edge instead of through the face.
• 3 compatibility strings — Weeke CNC machining centers, Homag PTP160 and Drilling Unit Venture 08M are all on the datasheet; 1 match on the machine plate is enough.
• Machined metal body, bolt-on face — the housing is a machined block with bolt holes in the mounting face, so it seats on the axis already on your machine.
• Sealed spindle nose — a seal ring sits on the chuck face in the part photos, keeping chips out of the 1 bearing seat behind it.
• Packed as 1 carton — a standard carton box per block means 1 pick from the shelf per spindle position, not 1 order per failure.
• Spare part, not a machine — filed under woodworking machine tools and spare parts: 1 block, fitted to the head you already own.

The choice is rarely between this block and a better one; it is between a 1-part order and a head rebuild, an agent visit or another month on a spindle that bores off-position.

• Replace 1 block, not 1 head. The datasheet lists a horizontal drilling block, so the 3 points that normally fail — spindle, nose seal, mounting face — all arrive on 1 part.
• One check, 2 formats. Say 22-024-95-6492 on the phone and type 2024956492 in the search box; both land on this block, so the wrong-size order stops being 1 keystroke away.
• 3 strings to cross-check. Weeke CNC, PTP160 and Venture 08M give 3 chances to confirm the fit before money moves.
• Stockable as 1 carton. Standard carton box packing keeps 1 block per carton on the shelf, so the next failure is a pick rather than a 1-off purchase order.
• A quote that closes on 3 details. Part number, quantity, machine model — with no published list price, 1 enquiry sets the figure for the batch you actually run.
• Built for the axis it sits on. Horizontal drilling is the 1 listed use, so the block is bought for the edge line and not as a general-purpose head.

Yes — if your machine is a Homag Weeke CNC machining center. The datasheet lists that family and cross-references 3 strings: Horizontal Boring Block, Homag PTP160 and Drilling Unit Venture 08M. Match 1 of them to the plate on the machine before the order goes out.

Yes. One block, 2 number formats: 22-024-95-6492 in 4 groups and 2024956492 in 10 digits. Quote either one and you are quoting the same horizontal drilling block.

Drilling horizontal holes. That is the listed usage — the holes that run into a panel edge, drilled by the axis the block bolts onto, on a Homag Weeke CNC machining center.

One. It is a single-spindle horizontal drilling block, so 1 unit replaces 1 spindle position and leaves the rest of the multi-spindle head where it is.

Just the block. The datasheet calls it a Horizontal Drilling Block For Weeke and files it under woodworking machine tools and spare parts, so the head, the axis and the machine stay in place.

Standard carton box, price by enquiry. No list price appears on the datasheet, so the figure comes back against the part number and the quantity you send.

Three items: 2024956492, the quantity, and your machine model. Add 22-024-95-6492 if your stock system stores the grouped form — either number identifies the same block.

Match the part number first. Check the old block against 22-024-95-6492 / 2024956492 and confirm the machine is a Homag Weeke CNC center; the listed cross-references PTP160 and Venture 08M settle the rest in 1 minute.