D-M8x45 D-M10x45 Drill Bits Holder Quick Change Chuck Drill Machine Tools

This is one holder family in two sizes: D-M8X45 with an M8 thread and D-M10X45 with an M10 thread, both 45 mm long. It is a quick change chuck style drill bits holder for woodworking drilling machines, rated high accuracy, low vibration and low noise, built for machines run in automatic mode. The body is steel and the part is heavy. Each holder ships in a plastic tube inside a carton box, customization is supported, and price is on request.

A shop that bores holes all day hits the same three things: a bit change that costs more time than the cut, a drill bit that creeps off centre because the holder never seated, and a spare that arrives in the wrong thread size because nobody wrote M8 or M10 on the order. This holder takes all three out of the day, in two sizes.

The D-M8X45 D-M10X45 drill bits holder is a quick change chuck type holder for drill machine tools. Size 1 is M8, size 2 is M10, both 45 mm long, so the family covers the two spindle threads found on most woodworking drilling and boring heads. The steel body clamps the bit in the chuck instead of letting it float in a worn seat, and that clamp is where the accuracy comes from.

Accuracy is rated high, vibration low, noise low - the three things that decide whether a machine can run in automatic mode for a whole shift. A holder that stays seated keeps the bit on one axis from the first hole to the last, so drilling angle and deep drilling depth stay repeatable without re-setting the head.

Each holder ships in a plastic tube inside a carton box, so the 45 mm body arrives with a clean shank. Customization is supported for sizes outside M8 and M10. Price is on request.

Ten things to check before you order a holder for a woodworking drilling machine.

• Two thread sizes, one family - D-M8X45 for M8 and D-M10X45 for M10, both 45 mm long, so a mixed line needs two part numbers.
• Quick change chuck - the bit is changed at the chuck, so one holder serves a run of different bits instead of one holder per bit.
• High accuracy - the holder keeps the bit on axis, which holds drilling angle and depth repeatable all shift.
• Low vibration - rated low, so the bit stays seated and the hole wall stays clean at production feed.
• Low noise - rated low, which matters when several heads run side by side.
• Steel body - made of steel and supplied as a heavy part, mass sitting at the spindle.
• Automatic operation - matched to machines that run in automatic mode, so the holder is not what stops a cycle.
• Woodworking focus - a woodworking drilling machine accessory for boring heads and drill stations.
• Customization supported - non-standard sizes quoted to your drawing, with 45 mm as the reference length.
• Protective packing - plastic tube plus carton box per holder, so the 45 mm part arrives with a clean shank.

Most shops have two options today: keep running a holder that no longer holds, or wait for a drilling head to come back from a rebuild across town. This part is the third option, and it is quoted per size so you only buy the thread you actually run.

• Less time lost to bit changes. Because it is a quick change chuck, one holder covers a run of bits instead of a drawer matched one to one.
• Fewer holes that miss the mark. High accuracy and low vibration mean the bit enters where the head was set and the depth holds all shift.
• One part number, two threads. M8 and M10 both at 45 mm, so you stock both and still know which holder belongs on which head.
• A spare still usable when you need it. Steel body in a plastic tube inside a carton box survives time on the shelf.
• Fits the work you already quote. As a woodworking drilling machine accessory it drops into existing boring and drilling stations.
• Custom sizes without changing supplier. Customization is supported, so a non-standard spindle does not force you to find a second source.

Two sizes. D-M8X45 takes an M8 thread and D-M10X45 takes an M10 thread, and both are 45 mm long, so the pair covers the two spindle threads most woodworking drilling heads use.

It is a quick change chuck type holder. The bit is released and re-clamped at the chuck, so you can switch drill bits without pulling the holder off the drilling head.

It fits drilling and boring heads that take an M8 or M10 holder, which is what both sizes are made for. Check the thread on your own spindle or on the holder you are replacing before you order, and pick D-M8X45 or D-M10X45 to match.

No. One holder serves a run of bits, because bits are changed at the chuck rather than by swapping the whole holder, which is the point of the quick change design.

Accuracy is rated high and vibration is rated low on the supplied specification. That combination is what keeps the drill bit on axis and keeps drilling angle and deep drilling depth repeatable, with noise also rated low.

Steel. The supplied specification lists the material as steel and the weight as heavy, so the mass sits at the spindle where the cutting load is.

Yes, customization is supported. Send the thread and the length you need and the non-standard size is quoted against your drawing, with the 45 mm standard length as the reference.

One plastic tube inside a carton box per holder, and the price is quoted on request per size and quantity - send the size you need, D-M8X45 or D-M10X45, plus the quantity, and you get a quote instead of a list price.