VCBL-K2 125x75x50-Q Vacuum Suction Cup 10.01.12.00644 CNC Machine Vacuum Block

Need a replacement vacuum pod for a Homag machining centre without waiting on an OEM order? The VCBL-K2 125x75x50-Q is the direct part. Its pad face measures 125 x 75 mm, it stands 50 mm high, the pad channels are arranged crossways, and the material number is 10.01.12.00644. Net weight is 0.6 kg per pod. It holds wood, plastic and composite panels flat for routing, drilling and cutting. The suction pad is a separate spare, so a worn lip is replaced on its own. Price on request.

A nesting shop that loses vacuum halfway through a cut pays for it three times. The panel shifts, the tool scraps the part, and the operator spends the shift re-seating pods instead of cutting. Buying a complete new pod every time a rubber seal goes flat is the second cost. Waiting weeks on an OEM delivery is the third.

It is a rectangular vacuum suction cup, also called a vacuum block, built for Homag CNC machining centres. The body carries a 125 x 75 mm pad face and stands 50 mm tall, with the pad channels arranged crossways. Two identifiers pin it down: material number 10.01.12.00644 and the designation VCBL-K2 125x75x50 Q. Ordering against both means the part that arrives is the one already on your table, not a lookalike.

Each pod weighs 0.6 kg, which matters when one operator loads a table row by hand each shift: four pods are 2.4 kg in total. The vacuum suction pad is listed as an available spare on its own. The grey contact face is the consumable; the black body is not.

It is used for routing, drilling and cutting on wood, plastic and composite panels, and it is made in China. Price on request: send the material number, the quantity and the machine model, and the quote comes back against that reference.

What separates this pod from a generic 125 x 75 block:

• Crossways pad arrangement — the suction channels run across the short side of the block, so vacuum spreads over the whole 125 x 75 mm rectangle.
• 9,375 mm² of pad face per pod — the 125 x 75 mm rectangle on its own; a four-pod row puts 37,500 mm² of contact face under one panel.
• 50 mm stand-off height — it sets the work plane 50 mm above the machine table, level with the row beside it.
• 0.6 kg per pod — a full four-pod row is 2.4 kg of lifting, one pair of hands, no hoist.
• Replaceable suction pad — the pad is listed as an available spare separately from the body, so a worn seal is one part.
• Two-way identification — material number 10.01.12.00644 plus the VCBL-K2 125x75x50 Q designation, so the pod is traceable on the parts list.
• Homag fitment — shaped and numbered for Homag CNC machining centres, including nesting tables that run pods in rows.
• Three processes, one pod — routing, drilling and cutting run on the same 125 x 75 mm block without re-nesting.
• Panel materials — wood, plastic and composite sheets, the three families this pad face is specified for.

Right now the choice is usually between an OEM pod on OEM lead time and a used pod nobody can date. This one is the third option.

• Swap the pad, keep the body. Because the suction pad is listed as a spare on its own, a worn seal costs one pad instead of a complete 125 x 75 x 50 mm block.
• A row that stays level. Every pod is 50 mm high, so a row of them sets one flat work plane and the panel does not rock on a pod that sits 2 mm off.
• Order by number, not by photograph. Quote 10.01.12.00644 with VCBL-K2 125x75x50 Q and the two together point at one part, which is what stops a wrong-height delivery.
• Changeover one person can do. At 0.6 kg a pod, re-seating a four-pod row is 2.4 kg of handling, done during the normal table set-up instead of as a separate job.
• Vacuum across the full face. Crossways channels spread the hold over 9,375 mm² of pad face, so the grip is not concentrated at one port under a small part.
• One pod for three operations. Routing, drilling and cutting all run on the same block, so a job that needs all three keeps its set-up instead of re-nesting between them.

Yes, if your parts list shows 10.01.12.00644 or VCBL-K2 125x75x50 Q. It is made for Homag CNC machining centres. Read the material number off the old pod before you order, because two pods with the same footprint can differ in height.

125 x 75 mm face, 50 mm high, 0.6 kg net. Those three numbers are the whole fit check: length, width and the height that sets the work plane.

Yes. The vacuum suction pad is listed as an available spare separately from the block, so a worn contact face is one part and the body stays in service.

The pad channels run across the short side of the block. The footprint is still 125 x 75 mm; the gripping pattern is turned 90° relative to a lengthways pod.

Wood, plastic and composite panels. It is used on routing, drilling and cutting work, where the panel has to stay flat under the cutter.

One per pod position on your table. Count the empty positions on the vacuum table and order that number, plus one pod held as a spare so a mid-shift failure does not stop the table.

Price on request. Send the material number 10.01.12.00644, the quantity and your machine model, and the quote is built on those three lines.

China. Origin is China, and the part is identified by material number 10.01.12.00644 rather than by a shop name.