132x75x74 Vacuum Suction Block For Biesse CNC Machining Center CNC Machine Spare

Need to replace a collapsed pod on a Biesse nesting table without re-datumming the grid? This vacuum suction block is a 132 × 75 mm pod, 74 mm tall, made for Biesse Rover and Biesse Point to Point pod positions. The plastic body carries the load, the rubber pad seals the vacuum, and the pod lifts the blank off the table so solid wood parts and edge details can be machined. Also made in 48 mm and 29 mm heights. 1–7 work days lead time.

Three things go wrong when a pod gives out on a nesting table: the sheet lifts and the cut drifts, the job is re-clamped on a fixture that marks the panel, and the replacement comes in the wrong height, forcing a re-datum. This vacuum suction block solves all three: 132 × 75 mm top face, 74 mm tall, for Biesse Rover and Point to Point pod positions.

It is a replacement pod, not a new fixture system. It drops onto the existing grid, and the rubber pad seals the vacuum against the panel. Because the pod lifts the material clear of the table, solid wood blanks and edge details become reachable that a flat spoilboard cannot touch. Small parts run on one pod with the rest of the grid gasketed off.

The family is made in 29 mm, 48 mm and 74 mm heights, so a grid can be dressed in one height. Full-size pods run 146 × 131 × 74 mm, half-size 75 × 131 × 74 mm, one-third size 55 × 131 × 74 mm. Plastic body, rubber pad, grey or brown.

A ball valve, sealing gasket, base, valve insert and locating ring are available separately, so a torn pad does not force a new block. Lead time is 1–7 work days from China, by air, sea or express, freight quoted once the destination port is known.

What decides whether the pod holds the sheet or costs you the shift:

• Three heights, one footprint. A 29 mm, 48 mm or 74 mm tall pod on the same 132 × 75 mm top face, so a new pod matches its neighbours.
• 74 mm is the tall one. The tallest height in the family, used where the blank has to sit well clear of the table.
• Rubber pad does the sealing. The pad closes the vacuum against the panel; the plastic block carries the clamping load.
• Sectionable grid. Gasket off the pods you are not using, and one block holds a small part on its own.
• Lifts the blank clear. Solid wood work and edge detail are reached from above the grid, not through a spoilboard.
• Grey or brown. Both colours are supplied; state the colour on the order.
• Accessories as line items. Ball valve, sealing gasket, base, valve insert and locating ring are ordered with the block or on their own.
• Full, half and one-third sizes. 146 × 131 × 74 mm, 75 × 131 × 74 mm and 55 × 131 × 74 mm cover a table split three ways.
• Biesse Rover and Point to Point. The pod sits on the pod positions of both machine families, with no adapter plate.
• 1–7 work days. Dispatch inside the week, by air, sea or express.

When a pod tears, most shops pick between waiting on an outside supplier and shimming the sheet to finish the job. This block is meant to take that choice away.

• The grid keeps its datum. Same 74 mm height as the pods already on the table, so nothing is re-referenced after the swap.
• One pod or a full grid. Large parts run every pod open; small parts run one pod with the rest gasketed off.
• Edge detail without a second setup. The blank sits off the table, so the tool reaches edges a flat table hides.
• A worn pad is a line item. Pad, gasket, valve and base are small parts, not a new fabrication job.
• Downtime in days. 1–7 work days to dispatch, with the accessories on the same order.
• Fits machines already on the floor. Biesse Rover and Point to Point pod positions, no adapter plate.
• Consumables you can shelf. Valve inserts, locating rings and gaskets are small and light, so the next tear costs a shelf visit rather than a purchase order.
• Three sizes, one reference. Full, half and one-third pods share the same height and top-face logic, so a mixed table is dressed from one list.

Yes, if your table uses the 132 × 75 mm pod position. Measure the top face of a pod you are removing and compare it with 132 × 75 mm; the block is made for Biesse Rover and Biesse Point to Point pod positions.

The top face is 132 × 75 mm and the height is 74 mm. The top face decides which grid position and sealing gasket fit; the height decides where the panel sits above the table.

Either is possible. The rubber pad, sealing gasket, ball valve, base, valve insert and locating ring are all available separately, so a torn pad alone does not mean a new block.

Match the pods already on your grid. The family is made in 29 mm, 48 mm and 74 mm; mixing heights puts the panel out of plane.

Yes. Gasket off the rest of the grid and the single pod carries the vacuum; that is how a small part is cut on a large table.

Usually nothing beyond the block. Order the base, valve insert or locating ring only if the ones on the machine are worn; they are separate items.

1–7 work days to dispatch. Air, sea or express is chosen to suit the order quantity, and freight is quoted once the destination port is known.

No. It is a replacement pod for Biesse machines, sold under our own reference 132X75X74mm. Compare it with the part you are removing before you order.