132x146x74mm Vacuum Suction Cup For Biesse CNC Woodworking Machine Spare Parts

Need a drop-in vacuum suction block for a Biesse CNC machining centre? The VCB117 measures 132 × 146 × 74 mm and replaces a cup that has stopped sealing, so panels hold during nesting, drilling and routing. Grey is standard, brown is available from the same range, and other sizes can be ordered. OEM production to your drawing is offered. Price is quoted per order, based on the sizes, colours and quantities in that order.

A vacuum cup that has gone hard does not announce itself. The panel creeps during routing, the first row of holes lands off position, and the operator starts adding clamps where the vacuum should have been enough. By the time the cup is changed, sheets have been scrapped and the run is behind.

The VCB117 is the replacement vacuum suction block for Biesse CNC woodworking machines. The seating face measures 132 × 146 mm and the block stands 74 mm tall, so it carries the panel at the height the table grid was built around. Grey is the standard colour, and brown is available from the same range.

Height is what a grid notices. Because every cup in an order is made to the same 146 mm × 132 mm × 74 mm pattern, a full set ordered together sits level on one table, and no single cup stands proud of the rest.

Other sizes are available, which matters when one table carries more than one cup size. OEM production is offered as well, so a block that has dropped out of the catalogue can be made to your drawing. Price is quoted per order: send model VCB117, the size, the colour and the quantity.

The VCB117 is a wear part, so what matters is fit, size and availability rather than headline specifications.

• Biesse fit — listed as a spare for Biesse CNC woodworking machines, so it is ordered as a wear item, not a table modification.
• Size you can check with calipers — 132 × 146 mm across the face and 74 mm tall, so calipers settle the match before you buy.
• Two colours from one pattern — grey as standard and brown on request, with the same 146 × 132 × 74 mm dimensions either way.
• Other sizes in the same range — if your table grid takes a different cup, further sizes in the same series are available.
• One supplier for a mixed table — the range also covers blocks and accessories for other machine brands, so one purchase order can clear a whole grid.
• OEM production — customization is offered, so a block can be produced to your drawing or to a sample.
• Quoted per order — the price follows the actual mix of sizes and colours, so a trial order costs what it should.
• One part number — VCB117 names this exact block, which keeps the next order identical to the last one.
• Supplied with the accessories — cups and the fittings that go with them come from one catalogue, not two suppliers.

Buyers usually end up in one of two places: paying a service shop to copy a block that is no longer listed, or running the table on a cup that has stopped sealing. Neither is a plan for the next panel.

• Back to cutting with the same seat. A worn cup is a wear item, so replacing it restores the 132 × 146 × 74 mm seat instead of reworking the fixture around a tired one.
• Colour stops being a stocking problem. Grey and brown share one pattern, so two machine vintages on one floor come from a single order.
• A discontinued block is not a dead end. OEM production is offered, so the part can be made to a drawing when the original is no longer in the catalogue.
• The table stays level. Cups built to one pattern at 74 mm keep the panel where the vacuum was designed to hold it, so hole positions repeat.
• The quote matches the order. Pricing is per order, so a mixed set of sizes and colours is quoted as one line rather than five.
• Repeat orders stay repeatable. VCB117 plus the size on the invoice is enough to get the same block next time.
• Fewer suppliers to chase. Blocks and accessories for other machine brands sit in one catalogue, so one contact covers the grid.

Yes, if the old block measures 132 × 146 × 74 mm. The VCB117 is listed as a spare for Biesse CNC woodworking machines, so the size on your table settles it rather than the age of the machine.

146 mm long, 132 mm wide and 74 mm high. Those are the block measurements themselves, so measure the old cup across the face and from base to top before ordering.

Yes. Grey is standard and brown is also available. Both are made to the same 132 × 146 × 74 mm pattern, so a brown cup sits at the same height as a grey one.

Yes. Other sizes are available in the same range. Send the measurement of the old cup and the position on the table, and the matching size can be quoted with the VCB117.

Yes. OEM customization is offered, so a block that is no longer in the catalogue can be produced to your drawing or to a sample you send.

The price is quoted per order. It depends on how many sizes and colours the order contains, so send the model, the size, the colour and the quantity for a quote.

Model VCB117, the size you need, the colour, and the quantity. A photo of the old block with a rule beside it is enough to confirm the match.

Yes. Vacuum suction blocks and the accessories that go with them are supplied, including blocks for various machine brands, so cups and fittings can ship together.