ISO30 High Precision Auto Tool Changer Gripper For CNC Router Machine Parts Tool Holder

Need a spare ISO30 gripper that goes onto a woodworking CNC router without re-setting the tool change position? This one is 100 mm long and 15.5 mm thick, built from plastic and steel, moulded in white and made for ISO30 holders only. It ships as one SKU with 100% inspection before shipment, so every piece is checked rather than sampled. OEM and ODM service is available when you work from a drawing, and shipping runs by sea, air or express. Price is quoted per order.

Shops that lean on automatic tool change keep meeting the same three things: a gripper that has lost its grip so a holder slips; a replacement that arrives at another length or thickness so the change position must be re-set; and a carton where some pieces will not seat. Any one of them stops the spindle.

The ISO30 High Precision Auto Tool Changer Gripper is a spare for woodworking CNC router machines. It measures 100 mm in length and 15.5 mm in thickness, and it is cut for the ISO30 taper the spindle already runs. The body is white, so a cracked or deformed grip is easy to spot on the bench before it ever reaches the magazine.

Two materials share the load: a plastic body for the grip and steel where the holder is carried. Heat and cold resistance is listed among the characteristics of this item. Nothing needs setting up — no motor, sensor or wiring sits in the 100 mm envelope, so a swap stays mechanical.

Each piece is checked before packing: 100% inspection before shipment, not one sample per carton. OEM and ODM service means the same 100 mm by 15.5 mm shape can be run to your drawing. Shipping is by sea, air or express; price is quoted per order.

What this spare is, in figures you can check against your own machine:

• ISO30 taper fit — cut for ISO30 holders only, so it matches the taper the router spindle was set up with, not a BT30 or HSK spindle.
• 100 mm overall length — a fixed length to measure the worn unit against, so the change position is confirmed before the swap and not after it.
• 15.5 mm thickness — the section size stated for this part, so a variant can be specified against a number instead of by eye.
• Plastic and steel — two materials doing two jobs: a moulded plastic body at the grip, steel at the loaded point.
• White body — the colour this part is supplied in, so a replacement matches the units already in the magazine and wear reads at a glance.
• Heat and cold resistance — listed as a characteristic of the item, so the part is not tied to a temperature-controlled room.
• 100% inspection before shipment — every single unit is checked before packing, not one piece pulled out of a batch.
• OEM and ODM service — drawings accepted, so the 100 mm and 15.5 mm sizes act as a starting point rather than a ceiling.
• One SKU, one model — ISO30 is the only type listed here, so a re-order is a single line and not a variant guess.

The usual choice is between running a gripper that has already begun to slip and waiting on a factory for a part worth a fraction of the hours it stops. Buying the spare on the same 100 mm and 15.5 mm sizes as the worn unit is the third route.

• A tool change that completes. The taper is ISO30 and nothing else, so the gripper is never asked to hold a holder it was not cut for.
• A size you can check before unbolting. The length is 100 mm and the thickness 15.5 mm, so the worn part is measured against two fixed numbers first.
• Incoming check already done. 100% inspection before shipment means a 15.5 mm spare does not need a third-party report on arrival.
• Fewer wrong orders. One model, one SKU and two materials — plastic at the grip, steel at the load — removes the variant guess from a re-order.
• Your drawing, our part. OEM and ODM service means a different length in the same 100 mm envelope can be quoted without changing supplier.
• Wear you can see early. A white body on a 100 mm part shows a crack or a flattened grip before a holder drops out of the magazine.
• Shipping that matches the urgency. Sea for stock, air or express for a spindle that is standing still.

Woodworking CNC router machines that run ISO30 holders. The part is sold as a spare for that machine type, and the taper is ISO30, so it is not a BT30 or HSK part.

100 mm long and 15.5 mm thick. Both sizes are fixed, so measure the part you are taking off against those two numbers before ordering.

Plastic and steel, supplied in white. The plastic carries the grip and the steel takes the load at the holder.

Yes. Heat and cold resistance is listed as a characteristic of this item, so it is not restricted to a temperature-controlled room.

Every piece. 100% inspection before shipment is specified for this part, so no unit leaves on the strength of a batch check.

Yes. OEM and ODM service is offered, so send the drawing and the 100 mm length and 15.5 mm thickness can be reviewed against it.

By sea, air or express. Say which you need when you ask for the quote, because the mode is fixed at that stage.

Ask for a quote. Price is given per order rather than published, so the quantity and the shipping mode go into the same reply.