Universal Tool Grinder 360 Degree Swivel Work Head 90-630mm Blades 3600 R/Min

A tool room ends up with several single-purpose grinders because each one only holds one kind of tool: one for planer knives, one for saw blades, one for drills. Each has to be bought, powered, given floor space and kept in adjustment — and each one is only used some of the time.
The MF-2718 is a universal tool grinder that avoids that. Profile cutters, planer knives, router cutters, circular saw blades and drill bits all go on the same work head. The head swivels 360° over a ∅360 mm circle and travels 250 mm, so the setup is turned into the wheel rather than the tool being re-chucked.
Everything that has to be set is set on a handwheel with a scale: the Spindle Angle Adjustment Handwheel and the Grinding Wheel Angle Adjustment Handwheel for the two angles, the Grinding Wheel Height Adjustment Handwheel and Grinding Wheel Lifting Handwheel for height, a Stroke Adjustment Handwheel for travel, and the Blade Holder and Slide Plate Adjustment Handwheels for position. An Indicating Positioner handles indexing.
Blades are held on a Blade Holder Base under a Blade Clamping Plate, located with a Saw Blade Positioning Piece and set with a Saw Blade Diameter Adjustment Rod. The spindle runs at 3600 r/min on a 370 W motor and the machine is built to GB12557-2000. It takes saw blades from ∅90 mm to ∅630 mm, stands 800 × 700 × 1500 mm and weighs 200 kg.

The work head is the machine. 360° of swivel over a ∅360 mm circle is what lets one grinder hold five different kinds of tool.

• Work head swivels 360° over a ∅360 mm circle — the tool is turned into the wheel instead of being re-chucked for each face.
• Stroke 250 mm — enough travel to run a large blade or a long cutter past the wheel.
• Sharpens profile cutters, planer knives, router cutters, circular saw blades and drill bits — five tool types on one work head.
• Saw blade capacity ∅90 – ∅630 mm — the largest blade in this range of grinders.
• 3600 r/min on a 370 W motor — a high wheel speed for a fine, cool edge on carbide and HSS.
• Tool Chuck — holds cylindrical tools such as router cutters and drill bits.
• Indicating Positioner — sets the index for multi-flute tooling and blade teeth.
• Spindle Angle Adjustment Handwheel — sets the spindle angle on a scale rather than by eye.
• Grinding Wheel Angle Adjustment Handwheel — sets the wheel angle independently of the spindle.
• Grinding Wheel Height and Lifting Handwheels — bring the wheel to the work and lock it there.
• Stroke Adjustment Handwheel — sets how far the work travels past the wheel.
• Saw Blade Positioning Piece and Diameter Adjustment Rod — locate a blade by diameter so the same setting can be repeated.
• Grinding Wheel Guard and 200 kg mass — covers the wheel while it runs; the mass is in the head and column, not the cabinet.
• Built to GB12557-2000 — the machine is built to a published Chinese machinery standard.

If your tool room has two or three single-purpose grinders and still sends work out, this is the machine that replaces the pile.

• Five tool types, one work head. Profile cutters, planer knives, router cutters, circular saw blades and drill bits all set up on the same head — no second machine, no second footprint, no second set of spares.
• 360° of swivel does the work. The head turns over a ∅360 mm circle and travels 250 mm, so a new face is reached by turning the head rather than by taking the tool out and setting it up again.
• Every setting has a handwheel and a scale. Spindle angle, wheel angle, wheel height, wheel lift, stroke, blade holder and slide plate — seven adjustments, each on its own graduated handwheel, so a setting can be recorded and repeated.
• ∅630 mm blades. The largest blade capacity in this range of grinders, at ∅90 mm to ∅630 mm.
• An indexing positioner for toothed tooling. The Indicating Positioner sets the index so multi-flute cutters and blade teeth are ground evenly rather than by eye.
• Built to a published standard. GB12557-2000 — the machine is built to a standard, not to what the workshop felt like on the day.

Profile cutters, planer knives, router cutters, circular saw blades and drill bits. They all set up on the same 360° swivel work head.

∅90 mm to ∅630 mm — the largest capacity in this range of universal tool grinders.

On graduated handwheels: a Spindle Angle Adjustment Handwheel and a Grinding Wheel Angle Adjustment Handwheel, with the wheel height on its own handwheel and a separate lifting handwheel for coarse movement.

With a Saw Blade Positioning Piece and a Saw Blade Diameter Adjustment Rod, so the same blade size can be set up again to the same position.

3600 r/min on a 370 W motor.

250 mm of stroke, on a 360° swivel head over a ∅360 mm circle. Grinding wheel lift is 200 mm.

It is a floor machine on a cabinet base, built to GB12557-2000, standing 800 × 700 × 1500 mm and weighing 200 kg.

The handwheels, guards and work light are fitted to the machine; tooling and wheels are specified to the job and confirmed before the order.

Tool rooms, joinery shops, furniture plants and saw shops that keep several kinds of cutting tool in service and want one machine that can hold all of them.

MOQ is 1 set, lead time is 5–8 working days, payment is by T/T, and the machine ships in an export-standard plywood case.